MIRUM_bodykits

Company

mirumbodykits@mail.ru

EN

RU

SHOP

Are you looking for an individual and unique style for your car? You have come to the right place

ABOUT US

MIRUM_Bodykits was founded by a team of professionals and has gathered the best skills and capabilities of modern 3D modeling and prototyping. This allowed us to create a unique look, with the highest quality of the final product. You can be convinced of this by counting how many degrees of preparation each detail goes through:
- body scan
- 3d modeling
- creation of a layout - CNC cutting to dimensions
- preliminary adjustment to the body
- matrix creation
- preliminary detail (checked and, if required, finalized)
- creation of the final matrix
- creation of the final product
- launch on sale
Therefore, choosing our products, you save time, hassle and money, excluding their preliminary adjustment.

MIRUM_Bodykits

A feature of our kits is the possibility of a safe upgrade. You are not tied to a one-time purchase of the entire body kit and long-term savings for its acquisition. Example. You have the option to buy only bumpers. You can install them with standard fenders. Later, did you decide to expand the body? No problem, you buy our extension and install it over our bumpers. Isn't that enough for you? You can choose bumper skirts made of carbon or Kevlar because the lower part of the MIRUM bumpers is replaceable. And if it is damaged, you do not need to buy the entire bumper, you can limit yourself to just the skirt. You always complete additional elements in the form of splitters, fenders, spoilers and additional fenders made of carbon or Kevlar!

Appearance cannot be ignored either. The MIRUM_bodykits company is trying to follow the trends of the modern market, involving the best designers in the field of not only creating bodies, but also rims, closing the integrity of the car's image. You can verify this by going to the gallery.

HOOD for TOYOTA ALTEZZA/GITA/LEXUS IS300

Has native installation locations and hood lock.

There are four options to choose from:
- FRP 100%
- Carbon outside + FRP inside
- Carbon 100%
- Kevlar 100%

Front bumper for Toyota Altezza/GITTA/Lexus IS300

Consists of two parts.
The upper and lower parts of the bumper can be made of: FRP, Carbon or Kevlar.

Rear bumper for TOYOTA ALTEZZA/LEXUS IS300

Consists of two parts.
The upper and lower parts of the bumper can be made of: FRP, Carbon or Kevlar

Front wide wings (+100mm) for Toyota Altezza/GITTA/Lexus IS300

+ 100 mm per side
The kit includes two front wings and two front bumper covers.

The wings can be made in three versions materials: FRP, Carbon, Kevlar
Installation with front bumper MIRUM_bodykits recommended

Rear wide fenders (+100mm) for TOYOTA ALTEZZA/LEXUS IS300

+ 100 mm per side
The kit includes two wide fenders on the left and right side.

The fenders can be made in three versions materials: FRP, Carbon, Carbon/Kevlar

Wide side skirts for TOYOTA ALTEZZA/LEXUS IS300

The kit includes a set of two thresholds: left and right.

The side skirts can be made in three versions materials: FRP, Carbon, Kevlar.

Front splitter for TOYOTA ALTEZZA/GITTA/LEXUS IS300

The splitter can be made in two material options: Carbon or Kevlar
* All necessary fasteners are included with the splitter.

Rear splitter for TOYOTA ALTEZZA/LEXUS IS300

The splitter can be made in two material options: Carbon or Kevlar
* All necessary fasteners are included with the splitter.

Diffusers for front wings

*Fitting with wide front fenders is recommended (+100mm) Mirum_bodykits
Supplied in two variations: Carbon or Kevlar

* Shipping cost is not included in the cost of goods and is calculated after placing an order.

Diffusers for rear wide fenders

Set of two diffusers. On the left and right side.
Carbon or Kevlar material

* Recommended installation with rear wide fenders MIRUM_bodykits (+100mm)
* Shipping cost is not included in the cost of goods and is calculated after placing an order.

Decorative element with the MIRUM_bodykits logo

Installation location between the lip of the rear wing and the protruding front of the sill.
material Carbon or Kevlar

* Shipping cost is not included in the cost of goods and is calculated after placing an order.

Spoiler for TOYOTA ALTEZZA/LEXUS IS30

material transparent plastic
* Shipping cost is not included in the cost of goods and is calculated after placing an order.

Wheels style by MIRUM

* Disk parameters can be changed as you wish
The photo shows a set of discs:
Front R18 et5 9J / 5*114,3
Rear R18 et15 10,5J / 5*114,3

Lightweight original rear wing left / right FOR TOYOTA ALTEZZA/LEXUS IS300

Follows the shape of the original wing.

* Price is for one wing
* Shipping cost is not included in the cost of goods and is calculated after placing an order.

Deflector for front bumper MIRUM

Located on the sides of the front bumper. Can be implemented as brake cooling.
Recommended installation with front bumper MIRUM_bodykits

MIRUM kit1 "street"

The kit includes all the elements shown in the photo:
- Bumper front
- Bumper rear

MIRUM kit2 "stance"

The kit includes all the elements shown in the photo:
- Bumper front
- Bumper rear
- Front wide wings (+100mm)
- Rear wide fenders (+100mm)
- Side skirts for rear wide fenders

MIRUM kit3 "drift"

The kit includes all the elements shown in the photo:
- Front wings
- Carbon diffuser for front wings
- Rear fenders
- Rear fenders carbon difuzor
- Side skirts
- Front splitter
- Rear splitter
- Bumper front
- Bumper rear
- Front wing strip between the wing and the sill with the logo MIRUM_bodykits
- Front bumper deflector (sides)

Color: black or white

Color: black or white

Color: black or white

Contact Us

If you still have questions about our product or have any suggestions, send a request, we will definitely answer you.

You agree with our Terms and Conditions

MIRUM_Bodykits

Phone: +7(950) 658-26-06
Email: mirumbodykits@mail.ru

index 620072 Ekaterinburg, 40 years of October street